Telos Zephyr Xport User Manual
Page 6
ZEPHYR
XPORT
USER’S GUIDE
IV
CHAPTER 1 - INTRODUCING THE XPORT
Test Lines
To aid you in testing and demonstrating your Zephyr
XPORT
, Telos Systems has the following
test number
s
available:
•
USA: +216 781.9310 or 216 781.9311 (Layer III Dual transmit @ 32 KHz sample rate for
Zephyr/Zephyr Xstream + aacPlus @ 48 kHz SR for Xport).
•
Germany: (49) 81 61 42 061 Dial this number twice (Layer III Dual transmit @ 32 KHz sample
rate for Zephyr/Zephyr Xstream + aacPlus @ 48 KHz SR for Xport).
•
Germany: (49) 81 61 42 062 (Layer II Mono @ 48 KHz) for Zephyr/Zephyr Xstream.
Notices and Cautions
e
CAUTION:
THE INSTALLATION AND SERVICING INSTRUCTIONS IN THIS MANUAL ARE FOR USE BY
QUALIFIED PERSONNEL ONLY. TO AVOID ELECTRIC SHOCK, DO NOT PERFORM ANY
SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS
YOU ARE QUALIFIED TO DO SO. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
e
WARNING:
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE. KEEP LIQUIDS AWAY FROM THE VENTILATION
OPENINGS IN THE TOP AND REAR OF THE UNIT. DO NOT SHOWER WITH THE
UNIT.
e
WARNING!
This equipment is designed to be operated from a power source that includes a third
“grounding” connection in addition to the power leads.
Do not defeat this safety feature. In addition to creating a potentially hazardous
situation, defeating this safety ground will prevent the internal line noise filter from
functioning.
w
IMPORTANT SAFETY INFORMATION!
If fuse replacement is required, please note: For continued protection
against fire, replace fuse only with same type and value.
e