Telos Zephyr Xport - Manual (Page 5)

ZEPHYR XPORT
USER’S GUIDE
CHAPTER 1 - INTRODUCING THE XPORT
iii
IMPORTANT NOTE:
The Zephyr
XPORT's POTS LINE interface is intended for use with analog loop start telephone
lines. This jack should not be connected to other types of lines, such a proprietary telephone jack
present in many office telephone systems. See Section 3 for more information. In order to comply
with Telecom regulations, the COUNTRY setting must be set appropriately before use.
Updates
The operation of the Telos Zephyr XPORT is determined largely by software. Periodic updates
may become available - to determine if this is the case check our web site. Contact us to determine
if a newer release is more suitable to your needs.
Our Telos electronic newsletter has announcements of major software updates for existing
products, as well as keeping you up to date on the latest Telos and Omnia product releases. To
subscribe go to:
http://www.telos- systems.com/support/default.htm
Trademarks
Telos Systems, the Telos logo, Zephyr, ZephyrExpress, Zephyr Xstream, Zephyr Xport and the
phrase "The Best Way to Hear From There" are trademarks of TLS Corporation. All other
trademarks are the property of their respective holders.
Copyright
Copyright © 2002 by TLS Corporation. Published by Telos Systems, who reserves the right to make
improvements or changes in the products described in this manual, which may affect the product
specifications, or to revise the manual without notice. All rights reserved.
Notice
All versions, claims of compatibility, trademarks, etc. of hardware and software products not made
by Telos mentioned in this manual or accompanying material are informational only. Telos
Systems makes no endorsement of any particular product for any purpose, nor claims any
responsibility for operation or accuracy.
Warranty
This product is covered by a one year limited warranty, the full text of which is included in the
section 7 of this manual.
Service
You must contact Telos before returning any equipment for factory service. Telos Systems will
issue a Return Authorization number, which must be written on the exterior of your shipping
container. Please do not include cables or accessories unless specifically requested by the
Technical Support Engineer at Telos. Be sure to adequately insure your shipment for its
replacement value. Packages without proper authorization may be refused. US customers please
contact Telos technical support at +1 (216) 241- 7225. All other customers should contact your
local representative to arrange for service.
We strongly recommend being at the unit when you call, so our Support Engineers can verify
information about your unit and the conditions under which the problem occurs. If the unit must
return to Telos, we will need your serial number, located on the rear panel.