TiVo Ooma Hub - Manual (Page 36)

32
installing the ooma hub
High-Speed DSL and Phone Service are on the Same Line
Your High-Speed DSL service is delivered on the same phone line as your phone service if:
You have DSL filters connected to each of your phones
You have your DSL modem connected to a DSL splitter in the wall jack
You get dialtone and can place a call if you plug a phone into the DSL phone jack
Your initial setup will look like:
1
Plug the ooma splitter directly into the phone jack in the wall. Unplug and remove any existing DSL filters
or splitters. Note: Some DSL filters and splitters are mounted flat on the wall jack.
2
Connect your DSL modem to one port of the ooma splitter using the original DSL phone cable.
3
Use the long phone cable provided and connect the port labeled WALL on the ooma Hub to the other
port of the ooma splitter.
Now your setup should look like this:
SkIP TO FINISHING INSTALLATION OF THE OOMA HUB
Modem
Phone / DSL
Jack
DSL Splitter
MODEM HOME
Modem
Phone / DSL
Jack
ooma Splitter
WALL