Binatone JE-800 - Manual (Page 5)

5
ENGLISH
SPECIAL SAFETY
PRECAUTIONS
Your juicer is not meant for the processing of fruit
and vegetables with small stones (e.g. sea-buck-
thorn, black-currant, tomatoes etc.). Before pre-
paring food always remove stones and other
tough tissues.
Before switching the juicer on always check if the
lid is properly installed and fixed.
Do not open the lid latches or remove the lid when the juicer is on.
Switch off the appliance wait for the motor to stop and then open
the appliance.
Your juicer is equipped with an automatic protection system; which
stops the operation if the juicer parts are not assembled properly.
To push the fruit and vegetables inside use only the pusher that
comes with the juicer. Do not use foreign objects, and never use
your fingers for that.
Do not overload the juicer; do not use excess force to get the fruit
through.
Do not let foreign objects get into the fruit inlet.
Only run the juicer for 5 minutes at a time, leave the appliance for
a 10 minute break before using again.
If your juicer becomes blocked, switch it off, unplug and remove
pulp of fruit and vegetables.
Always unplug after use and before disassembling and cleaning.
Do not use the juicer if the grater-filter or its housing is damaged.
If the juice stops coming out of the nozzle, it means that the juicer is
blocked. Stop loading or you may damage the motor. Then switch
the juicer off, unplug and clean as described in the cleaning in-
struction below; after that you may resume the juice preparation.
Please note; processing soft vegetables and fruit means you will
need to clean the juicer more often.
COMPONENTS DESCRIPTION
Picture A:
1. Pusher
2. Hopper
3. Lid
4. Latches
5. Product inlet
6. Separator
7. Separator nozzle with anti-drip system
8. Pulp outlet
9. Grater-filter
10.Juicer case
11.Grater-filter fixing piece
12.On/off switch
13.Measuring glass for juice with foam separator
14.Pulp collector