Tascam RC-898 - Manual (Page 77)

Index [ P–T]
Index-iii
Output timing (DA-88) 7-4
Outputting timecode 8-6
P
PAL/SECAM 2-2 , 8-2
Parallel port 2-5 , 9-1
pinout 3-2
Park position 8-7 , 10-3
Peak hold(meters) 7-6
Pitch shift 2-3 , 7-5 , 10-1
PLAY 2-5
Playback after location 6-3
Polarity (GPI devices) 9-1
Pre-roll
in auto punch mode 2-5 , 6-7 , 10-2
location 6-3 , 10-1
serial port unit 9-2 , 10-5
PRESET keys 2-4
PREVIOUS key 2-4 , 4-3
PRRL key 6-7
Pull up/down 2-3 , 8-6 , 10-5
Pulse width (GPI event triggers) 9-1
Punch operations
checking punch points 6-6
crossfade times 6-7
editing punch points 6-6
IN and OUT points 2-5
pre-roll and post-roll 6-7
recording 2-5 , 6-7
rehearsal 2-5 , 6-7
setting punch points 6-6
undo 6-6
R
REC 2-5
REC FUNCTION 2-2 , 5-2
Rec muting 7-2
Recalling a location memory 6-4
Rechase (timecode) 8-6
Rechase mode 10-3
Recording
reference levels 7-6
Recording delay 9-5 , 10-4
Recording in punch mode 6-7
Reference levels for recording 7-6 , 10-2
Reference modes 6-1
Rehearsal (punch operations) 2-5 , 6-7
Relative humidity 1-2
Relative time 2-3 , 6-1
setting 6-1
zero point 6-2
REMOTE OUT 2-5 , 3-1
Remote track arming on DA-98 9-5
Repeat play 6-5 , 10-3
"RTZ" (return-to-zero) 6-2
REW 2-5
Roll-around cart 1-3
RS-422
control 9-2
enabling and disabling recording 9-3
location pre-roll 9-2
S
Safing tracks 2-2 , 5-2
Sampling frequency 5-1
SELECT key 2-4
Selecting audio input sources 7-5
Selecting timecode source 8-1
Selecting units 2-3
for transport operations 5-1
in menus 4-3
NEXT and PREVIOUS keys 2-4
using the MACHINE key 2-4
Serial port 10-5
control mode 10-5
pinout 3-2
pre-roll 9-2 , 10-5
time mode 10-5
timing mode 9-3
Setting punch points 6-6
Setting relative time reference 6-1
Setting values to zero 4-2
Settings (user) 4-4
SHIFT key 2-4
Shuttle 5-2
monitoring 5-3
muting 5-3 , 10-2
Shuttle control 2-4 , 5-2
Shuttle mode 5-2
Shuttle monitoring 5-3 , 10-6
Sine oscillator 7-6 , 10-2
Slipping tracks 2-3 , 7-1
Sony P2 protocol 2-5 , 3-2 , 9-2
Source monitoring 2-2
Specifications 10-9
"Stop" & "still" tally messages 9-6 , 10-4
Storing timecode values 2-3
STR key 2-3
"Striping" tapes 8-3
Synchronizing output timecode with audio 8-6
Synthesizing timecode from ABS 8-1 , 10-4
T
Table of monitoring modes 5-5
Tally for cue-up 10-4
Tally messages 9-6 , 10-4
Tape counter 2-3
Tape timecode 10-6
Tapes (formatting) 5-1
TC REC 2-3
TDIF word length 7-5 , 10-2
Telecine frame rates 8-6 , 10-5
Terminator 3-1
Timecode 8-5