Teledyne Field Wizard 2101 - Manual (Page 12)

2101 Field Wizard
Section 1 Introduction
1-4
Figure 1-3 Field Wizard Components - Bottom View
1
2
3
4
5
Table 1-2 Field Wizard Components - Bottom View
Item No. Name Description
1 Communication Connector This connects the Field Wizard to the 2100 Series module and is used to
transfer data.
2 Connector Cap Insert into the communication connector when not in use to protect the
connector from moisture damage. When the connector is in use, store
the connector cap in the cap holder.
3 Cap Holder Stores the connector cap when the communication connector is in use.
4 Desiccant Cartridge and
Hydrophobic Filter Prevents moisture from entering the unit.
5 Latch Push in to lock the module in a stack.