TP-Link TL-R860 - Manual (Page 27)

TL-R860 Cable/DSL Router User Guide
the router, default value is 192.168.1.1
¾
Default Domain - (Optional.) Input the domain name of your network.
¾
Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or
consult your ISP.
¾
Secondary DNS - (Optional.) Input the IP address of another DNS server if your
ISP provides two DNS servers.
Note: To use the DHCP server function of the router, you must configure all computers
on the LAN as "Obtain an IP Address automatically" mode. This function will take effect
until the router reboots.
5.5.2 DHCP Clients List
This page shows Client Name, MAC Address, Assigned IP and Lease Time for each
DHCP Client attached to the router (Figure 5-13):
Figure 5-13 DHCP Clients List
¾
Index - The index of the DHCP Client
¾
Client Name - The name of the DHCP client
¾
MAC Address - The MAC address of the DHCP client
¾
Assigned IP - The IP address that the router has allocated to the DHCP client.
¾
Lease Time - The time of the DHCP client leased. Before the time is up, DHCP
client will request to renew the lease automatically.
You cannot change any of the values on this page. To update this page and to show the
current attached devices, click the Refresh button.
5.5.3 Address Reservation
When you specify a reserved IP address for a PC on the LAN, that PC will always
receive the same IP address each time it accesses the DHCP server. Reserved IP
addresses should be assigned to servers that require permanent IP settings. This page
is used for address reservation (shown in
Figure 5-14 ).
- 22 -