TP-Link TL-R860 - Manual (Page 28)

TL-R860 Cable/DSL Router User Guide
Figure 5-14 Address Reservation
¾
MAC Address - The MAC address of the PC of which you want to reserve IP
address.
¾
Assigned IP Address - The IP address of the router reserved.
¾
Status - The status of this entry either Enabled or Disabled.
To Reserve IP addresses:
1. Click
the Add New button. (Pop-up Figure 5-15)
2. Enter the MAC address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.)
and IP address of the computer you wish to add.
3. Click the Save button when finished.
Figure 5-15 Add or Modify an Address Reservation Entry
To modify or delete an existing entry:
1. Click
the Modify in the entry you want to modify. If you want to delete the entry, click
the Delete.
2. Modify the information.
3. Click
the Save button.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
Click the Next button to go to the next page and Click the Previous button to return the
previous page.
Note: The function won't take effect until the router reboots.
- 23 -