TP-Link TL-R860 - Manual (Page 59)

TL-R860 Cable/DSL Router User Guide
Appendix B: Configuring the PCs
In this section, we’ll introduce how to install and configure the TCP/IP correctly in
Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter’s
manual if needed.
1. Install TCP/IP component
1) On the Windows taskbar, click the Start button, point to Settings, and then click
Control Panel.
2) Click the Network and Internet Connections icon, and then click on the
Network Connections tab in the appearing window.
3) Right click the icon that showed below, select Properties on the prompt page.
Figure B-53
4) In the prompt page that showed below, double click on the Internet Protocol
(TCP/IP).
- 54 -