THALES DATACRYPTOR - Manual (Page 41)

Datacryptor Ethernet User Manual Element Manager Reference
1270A450-005 - June 2008 Page 41
• Beneath the front panel diagram are five large buttons that provide direct access to
management facilities (see the
Front Panel Viewer buttons section below).
Note: Pressing F5 while using the Front Panel Viewer will cause a refresh of all
displayed settings from the unit.
User Key Material
Adminv2.usr User key material (containing public and secret keys of user)
protected by a default password of: PASSWORD
Adminv3.usr Alternative user key material (containing public and secret keys of
user) protected by a default password of: 11aaBB!!PASS
The Front Panel LEDs
The Front Panel LEDs indicate the state of the unit.
Indicator Light State Indication
On Unit is powered on Power (green)
Off No power
On Normal operation
Fast Flash Link Down
Slow Flash Not used
Network (green)
Off Loss of Signal, Loss of Synchronization
On Errors have occurred
Fast Flash New errors in log
Error (red)
Off No errors
Off 100 Mbps operation 10M (100 Mb
Ethernet unit only)
On 10 Mbps operation
Off Normal operation - no loopback enabled
Slow flash Host loopback enabled
Fast Flash Network loopback enabled
Loopback (yellow)
(1 Gig and 10 Gig
Ethernet units only)
On Host and Network loopback enabled
On Unit is alarmed - Hardware fault
Fast flash Unit is not commissioned
Alarm (red)
Off No Alarm
On Unit is in Encrypt mode
Slow flash Standby
Encrypt (green)
Off Unit is not in Encrypt mode
Fast Flash Unit is in Plain mode Plain (red)
Off Passthrough mode not selected
Host (green) On Normal operation