THALES DATACRYPTOR User Manual
Page 94
Advertising
Appendix B: Loading Datacryptor Unit Software
Datacryptor Ethernet User Manual
Page 94
THALES
Completing the Upload
1. Progress of the load is shown via the Upload Progress bar and you will be notified when
this is finished. If ‘Save Log Events’ was selected, a dialog will now prompt you for the
file name and location for saving the log file.
2. Upload of the application is complete, click Close to shut down the application, or
connect another Datacryptor for loading.
3. After the application has been loaded and the unit reboots, the algorithm will need to be
loaded into the unit. See the section
for more information.
Note: Some algorithms may have to be loaded at the factory or under secure conditions.
Advertising