The ip management tab – THALES DATACRYPTOR User Manual
Page 61
Datacryptor Ethernet User Manual
Element Manager Reference
1270A450-005 - June 2008
Page 61
Note: The loopback mode is regarded as a transient feature intended purely as an aid to
troubleshooting. Therefore when the unit is rebooted the loopback options are set
to Disabled.
The IP Management Tab
The properties on the IP Management tab control the IP addressing of the unit.
They are as follows:
•
Control Port – the IP address and net mask of the unit’s Control Port, this value is only
used if the PPP does not negotiate another value
•
Network - the IP address and net mask of the unit’s Network Port.
•
Ethernet - the IP address and net mask of the unit's Ethernet (management) Port.
•
Control Port - these fields show the settings for dial up networking.
•
– click this button to configure the SNMP trapping for this unit.
•
- click this button to configure the IP Routing table for this unit