THALES DATACRYPTOR - Manual (Page 86)

Appendix A: Device Maintenance Datacryptor Ethernet User Manual
Page 86 THALES
Appendices
Appendix A: Device Maintenance
Periodically perform maintenance on your Datacryptor.
• Keep components free of dust and other particulate matter.
• Check fans for reduced airflow caused by dust build-up and clean as necessary.
• Examine cables and fiber for damage and ensure that airflow requirements have been met.
• Consult the Environment tab on the Front Panel Viewer’s Properties dialog for readings of
the fan speeds and unit temperature. Make a note of these readings under normal
operating conditions – these readings can be used for comparison in the event of a
Fan/Heat monitor alarm.
Otherwise, no special maintenance is required.
Physical Inspection
The Datacryptor is housed in a tamper evident chassis. Periodically check the chassis for
evidence of tampering. Items to look for include stripped screws and damaged seals.
Figure A-1 Location of Tamper Proof and Identification Labels on the units
The frequency of a physical inspection depends on the value of the intellectual property being
protected and the security of the environment in which the Datacryptor is located. For example,