TOA Electronics C-DR161 CU Series - Manual (Page 109)

109
[ Preset ]
Choose position numbers from the dropdown list box.
Store: Programs the current camera position into the position number.
Move: Moves the camera to the programmed position.
Notes
• The camera will not move if a number with no preset position number is
selected, even if the "Move" button is pressed. Up to 255 preset positions
can be stored.
• Preset number storing can be performed only using the administrator
account.
[ Auto Control ]
Auto Pan:
Automatically pans Combination Cameras.
Preset Sequence: Operates Combination Cameras in preset sequential
order.
Stop: Stops auto pan or preset sequence operations.
[ Camera Menu ]
Used to operate the Combination Camera menu. (For more detailed
information, refer to the Combination Camera instruction manual.)
ON:
Enters the camera menu.
OFF: Exits the camera menu.
Set: Sets camera menu selection.
Clear: Clears the camera menu item.
Position Selection: Selects camera positions.
Notes
• Only an administrator account can use the camera menu.
• The Camera menu may not function correctly if different maker's
Combination Cameras are included in the system.