Transmission condition setting, Sent mail content – TOA Electronics C-DR161 CU Series User Manual
Page 92
92
T R A N S M I S S I O N
S E T T I N G
C A M 1
Y E S
P R I O R I T Y
R E C
N O
C A M 2
Y E S
F A I L U R E
N O
C A M 3
Y E S
S Y S T E M
O P E R A T E
Y E S
C A M 4
Y E S
C A M 5
Y E S
C A M 6
Y E S
C A M 7
Y E S
C A M 8
Y E S
C A M 9
Y E S
C A M 1 0
Y E S
C A M 1 1
Y E S
C A M 1 2
N O
C A M 1 3
N O
C A M 1 4
N O
C A M 1 5
N O
C A M 1 6
N O
Y E S
Item
Selection
Description
CAM 1 – 16 (1 – 9)
ON: Transmits emails when the Alarm Event recording begins.
OFF: Does not transmit emails even if the Alarm Event recording begins.
PRIORITY REC
ON / OFF
ON: Transmits emails when Priority recording begins.
OFF: Does not transmit emails even if Priority recording begins.
ON / OFF
FAILURE
ON / OFF
ON: Transmits emails when Failure log is added.
OFF: Does not transmit emails even if Failure log is added.
When set to ON, following logs are transmitted.
Video Lost occur, Video Lost reset (image return/ setting invalid/ release
operation), Remaining Capacity Warning start, Remaining Capacity Warning
reset, Hard Disk error, Hard Disk full, Hard Disk full reset, Fan failure
SYSTEM OPERATE
ON / OFF
ON: Transmits emails when System log is added.
OFF: Does not transmit emails even if System log is added.
When set to ON, following logs are transmitted.
Power ON, Hard disk initialization, Login (Operation Level 1, 2 and 3),
and Logout
Note: Underlined settings represent factory-preset settings.
26.1. Transmission Condition Setting
Set conditions for transmitting emails when alarm is triggered,
motion is detected, Priority Recording begins, equipment fails,
or power is switched on.
[ Sent Mail Content ]
Subject:
C-DR161 Callout Mail
(For 16-channel units)
C-DR091 Callout Mail
(For 9-channel units)
Content:
REPORT ALARM CAM
(For an Alarm Event Recording;
is the camera number)
REPORT PRIORITY
(For a Priority recording)
REPORT FAILURE
(For an Equipment Malfunction)
REPORT SYSTEM OPERATION (For System Operation)
DVR ID ;
(DVR ID;
is the set DVR number)
DVR NAME :
(DVR name;
is the set DVR name)
Notes
• It is not possible to attach screen shots to sent mail.
• If katakana is used for DVR name,
will be displayed for the DVR name to be transmitted.