TOA Electronics C-DR161 CU Series - Manual (Page 35)

35
3 seconds elaps
Step 1 Step 2
Step 4 Step 3
L 1
S A T J A N / 0 1 / 0 5
0 : 0 0 : 0 0
A B
L 2
S A T J A N / 0 1 / 0 5
0 : 0 0 : 0 0
A B
L 3
S A T J A N / 0 1 / 0 5
0 : 0 0 : 0 0
A B
L 1 L 2
S A T J A N / 0 1 / 0 5
0 : 0 0 : 0 0
L 3 L 4
A B
3 seconds elaps
3 seconds elaps 3 seconds elaps
(Setting Example)
Step 1 : Camera 1
3 seconds
Step 2 : Camera 2 3 seconds
Step 3 : Camera 3 3 seconds
Step 4 : 4-split A 3 seconds
Note
That when the screen is switched, the
picture may be distorted momentarily.
Menu key
Menu key
Zoom selection screen Zoom screen
Zoom key
Zoom key
Live or play back screen
Zoom key
1. Press the zoom key
The zoom selection screen is displayed. The pointer is displayed on the screen.
2. Move the central point of the subject to be zoomed using the [ ], [ ], [ ], and [ ] keys, then
press the Menu key.
The subject can be zoomed with the designated point at the center. Zoomed areas can be moved using the
[ ], [ ], [ ], and [ ] keys even while zoomed.
3. Press the Menu key when the zoom screen is displayed.
The display reverts to the zoom selection screen. Pressing the Zoom key again when the zoom screen is
displayed resets the zoom display.
Note
When channels are changed, multi-segment split-screen display is selected, or a search function is operated
during zoom display, the zoom mode is reset.
13.7. Sequence Display
Camera live images are displayed in sequential order when the Sequence key is pressed while in live mode.
Viewing intervals and cameras to be displayed can be set on the menu screen. Sequence key lights
continuously during Sequence display. (Refer to
p. 88 ; Sequence Setting.)
13.8. Zoom Display
Live or recorded full-screen images can be viewed in 2 x zoom display. Zoom key lights continuously while the
Zoom selection screen or Zoom screen is displayed.