Telular SX7M - Manual (Page 13)

Status LEDs
In addition to checking your status through the Telular Device Manager on your computer, you
can also use the LED indicators on the unit for a quick check of valuable connection and
coverage information.
The following table explains how the LED colors and blink rates indicate your device’s coverage
and connection status.
LED Reference Table
Power Messaging
Phone /
Fax
Service /
SIM
Signal
Strength 1
Signal
Strength 2
Signal
Strength 3
Off No Messages
On Hook /
No WAN
No GPS
Solid
AC / Batt
Normal
Voicemail On-Hook / WAN Service / 2G 1 Bar + GPS 2 Bars 3 Bars
Slow Batt Only SMS Service / 2.5 G 1 Bar 1 Bar 2 Bars
Fast Both
On-Hook /
WAN Tx
Service / 3G
Solid
AC / Batt
Charging
Off-Hook / WAN Roam / 2G
Slow Low Batt
Off-Hook /
No WAN
Roam / 2.5G
Fast
Off-Hook /
WAN Tx
Roam / 3G
Solid Batt fault Off-Hook / WAN No Service
Slow Batt crit
Off-Hook /
No WAN
PIN Locked
Fast
Off-Hook /
WAN Tx
SIM Error /
No SIM /
Net Reject
WiPATH SX7T LED Indicators
Power
Messaging
Phone/Fax/Data Service/SIM
Signal
Strength
1
Signal
Strength
2
Signal
Strength
3
Status Indicators
Wi PATH TM SX7 11 User Guide