Telular SX7M - Manual (Page 15)

Connect the SX7 to Your Computer With a USB Cable
1. With your computer and the SX7 powered on, connect the terminal end of the USB cable
to the USB Type B Port on the SX7.
2. Connect the other end of the USB cable to an available powered USB Type A port on
your computer.
3. A Found New Hardware Wizard will open. Select “Install the software automatically
(Recommended)” and click Next.
If a Windows Logo testing warning appears, click Continue Anyway.
4. Click Finish to complete the installation.
Set Up a Dial-Up Networking (DUN) Connection
1. With the drivers and USB modem installed and connected, click Start > Control Panel >
Network Connections.
2. Click File > New Connections.... (The New Connection Wizard will start.)
3. Select the following settings and click Next after each selection:
Connect to the Internet.
Set up my connection manually.
Connect using a dial-up modem.
Set up my connection manually.
Note The USB host (Type A) port on the SX7 is not currently active. It is reserved for future use
USB
(Type B)
USB Connection Option
Wi PATH TM SX7 13 User Guide