Telular SX7M - Manual (Page 25)

DHCP Settings
DHCP Server (Ethernet only): Dynamic Host Configuration Protocol. Select Enable to
allow the unit to receive IP address, subnet mask, default gateway, and other settings
dynamically through a server.
Number of DHCP Users: Maximum number of connections allowed. (Default is 50.)
Client Lease Time: Amount of time new DHCP settings remain in effect.
(Default of 0 minutes signifies 1 day [24 hours].)
Static DNS 1–3: Allows you to enter known fixed DNS (Domain Name System) addresses.
WINS: Allows you to enter a known fixed WINS (Windows Internet Name Service) address.
Currently Assigned: Click DHCP Clients Table to display currently connected
DHCP client information.
Timezone: Shows currently assigned time zone (assigned by the network). Can be
changed by user.
Time Server: Use to select time server for the unit. (Default is Wireless Network Time [NITZ].)
Setup > Wireless WAN
The settings for Wireless WAN setup are covered in “Setting Up Your Wireless WAN Data
Connection” on page 8.
Connected
ABC Wireless
isp.abcwireless
Advanced Data Connection Options
Wi PATH TM SX7 23 User Guide