Tasco Digital Trail Camera 119223C - Manual (Page 12)

12
VIEWING THE PHOTOS and VIDEOS
After your camera has been operating for awhile, you will of course want
to review the photos and/or videos it has been capturing. This can be
done by either of two methods, according to your preference or the
availability of accessory equipment:
using an SD Card Reader
Make sure the power is off, and remove the SD card by pushing down
lightly on the top edge of the card-it will pop up for removal.
Insert it into an SD card reader (available at most computer, photo, or
electronics dealers) connected via USB to your PC or Mac to view, copy,
or delete the photos (standard JPG files) and movies (AVI files) inside the
“DCIM/100MEDIA” folder on the card. Double click on an individual file to
see it, or open the files using the photo software of your choice.
Connect the Camera to PC directly
Press POWER to turn on the camera, then press the MENU button.
Connect your camera to your PC with a compatible USB cable. The PC will
recognize the camera as an external storage device, using the “USB Mass
Storage” standard (no driver installation necessary-not compatible with
Windows 98 or earlier). The PC will display a new disk symbol under “My
Computer” or in Windows Explorer, and you will see a dialog window on
your desktop with several options to view, move, or copy the photo and
video files that are stored on the SD card.