Tekkeon MP1860A - Manual (Page 10)

8
Charging a Device Using Your Device USB Cable
You can use your own device USB cable to connect to your device. However, for devices with Mini
or Micro USB power ports, it is highly recommended that the included Mini or Micro USB adapter
tips with retractable cable are used in place of the device USB cable.
1. Insert the USB plug on the device cable into one of the output ports on TekCharge MP1860A.
2. Connect the opposite end of the USB cable into the power jack on your portable device.
3. Slide the TekCharge MP1860A power switch to ON to provide power through the USB port.
4. Turn on the portable device and use it as you would normally. While connected, TekCharge
MP1860A will power and/or charge your device.
Or
Leave the portable device turned off and TekCharge MP1860A will charge the device battery.
5. When finished, unplug the USB cable from TekCharge MP1860A and your device.
TIP: You can use the emergency flashlight while charging your iPad, iPhone or iPod.
Charging a device
using its USB cable.