Tekkeon MP1860A - Manual (Page 11)

9 USER GUIDE
Charging a Device Using an Adapter
1. Select the adapter tip that fits securely into the power jack
on your portable device and plug it into the
retractable input/output cord.
2. Insert the USB plug on the input/output
cord into one of the output ports on the end
of TekCharge MP1860A.
3. Connect the adapter plug into the power jack
on your portable device.
4. Slide the TekCharge MP1860A power switch to ON
to provide power through the USB port.
5. Turn on the portable device and use it as you would
normally. While connected, TekCharge MP1860A will power and/or charge
your device.
Or
Leave the portable device turned off and TekCharge MP1860A will charge the device battery.
6. When finished, slide the power switch to OFF and unplug the power output cord from TekCharge
MP1860A and your device.
NOTE: If none of the included adapter tips fits snugly into your portable device power jack, please
go to our web site at www.tekkeon.com/MP1860Adapters to determine which adapter plug you
need for your device. You can obtain most adapters through the web site, or by contacting Tekkeon
by phone at
888-787-5888 or 714-832-1266. If available through Tekkeon, the adapter will be sent
to you for a nominal fee.
Charging a device
using an adapter.