Tapco SW-10 - Manual (Page 13)

13
Appendix B: Connections
XLR Connectors
XLR connectors are used to make balanced
connections to the SW•10. They are wired as follows,
according to standards specifi ed by the AES (Audio
Engineering Society).
XLR Balanced Wiring
Pin 1 = Shield
Pin 2 = Hot (+)
Pin 3 = Cold (–)
RCA Plugs and Jacks
RCA-type plugs (also known as phono plugs)
and jacks are often used in home stereo and video
equipment and in many other applications. They are
unbalanced and electrically equivalent to a 1/4" TS
phone plug.
RCA Unbalanced Wiring:
Sleeve = Shield
Tip = Hot
2
2
3 1
1
SHIELD
COLD
HOT
SHIELD
COLD
HOT
3
SHIELD
COLD
HOT
3
2
1
TIP SLEEVE TIP SLEEVE