Plu verifying label, 5 plu verifying label – Toshiba TEC SL-9000 series User Manual
Page 38
11-12
11. PROGRAMMING PROCEDURES
EM1-31064
11.5 PLU VERIFYING LABEL
11.5
PLU VERIFYING LABEL
Menu Page:
1
Item No.:
4
PLU data stored in the scale are verified in the following procedure.
NOTES:
1.
Labels are printed in either batch mode or on-demand mode.
2.
When no PLU is stored in the selected range, an error occurs when the ENTER key is
pressed.
3.
Pressing the CLEAR key releases the scale from the error mode and returns to the initial
status of this menu.
4.
After clearing a paper jam error, the scale will wait for an entry of PLU# again.
1
0
0
1
1
0
0
1
0
8
4
<MENU>
Page 1
NEXT
PLU
ENTER
CLEAR
PROG.
ESC.
ENTER
The
verification
label is issued.
<MENU>
Page 1
Main
<MENU>
g
g
Set the entire PLU#.
Set the individual PLU#. (Ex. PLU #100)
Set the block PLU#. (Ex. PLU #100~199)
Set the zone PLU#. (Ex. PLU #100~108)
To interrupt
label issue.
To resume label issue
which has been interrupted.