Toshiba TEC SL-9000 series - Manual (Page 86)

14-21
14. OPERATING PROCEDURES EM1-31064
14.13 FLOATING VENDOR
Price deletion
Prices already registered can be deleted in the following procedure.
Enter vendor #.
VOID
VOID
NEXT
PLU
or
PRT
*
C
Subtotal
The following procedure will sum up all of the registered items.
Enter vendor #.
Enter prices.
A receipt will be issued.
ST
C
PRT
*
Enter the deletion mode.
Press:
NEXT PLU: the next item
VOID:
the previous item
Delete a registered price.
Exit the deletion mode.
Press:
Press:
(Cancel)
(2) Restraints in case of clerks' name printing on labels
1)
"GRADE LINE" can not be selected and printed.
2) Commodity name can not be printed on the 4th line of 57 mm width label and
2nd line of 48 mm width label, because 1 line of commodity is used for clerk's
name printing.
3) The printing position of clerk name will be selected by the initial setting for
GRADE LINE position.
Initial 3-6 (G. Line Print Position)
0: Right side on bottom line of commodity name
1: Left side on bottom line of commodity name
If you would like to switch the initial setting # please contact your authorized
TOSHIBA TEC representative.