TravRoute Pocket PC 5 - Manual (Page 5)

- vi -
4. Give your data region a name and click Next.
5. You will then be given the option to either select additional map data
or download selected areas to your Pocket PC. Click Download.
NOTE: Instead of City Radius you could select Map Area to download map
data within a chosen area (select and download data by drawing a box with your
mouse) or Trip to download map data for a specified trip. Or you can download
a whole Region.
(3) Download the Data:
1. Clicking the Download icon will take you to a screen where
Available Area(s) for download are displayed on the left.
2. To designate an area to include in the download, highlight it and then click
on the right arrow button to move it to the Data Included in This
Download list on the right. To take an area off the list, highlight it and
click the left arrow button.
3. After confirming that the area(s) you would like to download are in the
Data Included in This Download list, click Download to complete the
map data download process.
NOTE: CoPilot won’t open on your Pocket PC unless map data has
previously been downloaded from CoPilot on the desktop.
To launch CoPilot, first turn on your Pocket PC, attach the GPS receiver, and
insert your QuickStart card (if provided). Tap Start on your Pocket PC and
choose CoPilot from the drop-down menu.
If You Are Using a CoPilot GPS or Quick Start Card:
You will be prompted to enter your Product Key Code on your Pocket PC (it
can be found on the front cover of this Quick Start). Enter your Product Key
Code and skip to Step 6 (hardware setup).
If You Are Using a Third Party GPS Receiver:
You must activate your CoPilot software in order to use it. The first time you
open CoPilot on your Pocket PC, the Activate screen will appear and you will be
asked to activate the software.
For Automatic Activation, follow the on-screen instructions:
1. Synchronize your Pocket PC with your desktop/laptop computer via
ActiveSync.
2. Connect your desktop/laptop to the Internet.
3. Tap Next when ready and enter your e-mail address when
prompted. CoPilot will be activated within a few seconds. Tap Next to
begin using CoPilot.
4. Select your desired map region (Step 6) and then see Step 7
(hardware setup) to configure your GPS receiver.
If you are unable to synchronize your Pocket PC with your desktop/laptop but
have internet access, you can Activate Manually as follows:
1. On your Pocket PC, check Activate Manually and tap Next.
2. Enter your Product Key Code (see Quick Start front cover) where
indicated and tap Next. Your Licence Number will be displayed.
3. On your desktop/laptop, connect to the internet and browse to
http://activate.alk.com. Type in your Product Key Code, Licence
Number, and E-mail Address where indicated and click Submit.
Your Activation Code will immediately be e-mailed to you.
4. On your Pocket PC, type in your Activation Code where
indicated and tap Activate. CoPilot will launch upon activation.
5. Select your desired map region (Step 6) and then see Step 7
(hardware setup) to configure your GPS receiver.
If you purchased CoPilot with a single region licence, you will be asked to select a
region the first time you launch the software on your Pocket PC. Carefully
choose a region, as it cannot be changed once selected. If you select Italy,
for example, you will be able to use CoPilot's Italian street maps on your Pocket
PC. If you later want to use street maps from other regions, you will need to
purchase an update licence from your dealer.
5. Activate the software
6. Map Region Selection
- v -