TechniSat EC 4004 - Manual (Page 10)

TechniSat EC 4004
10
Teletext broadcasts can only be received on D or D2 MAC channels. The key functions described in the following
section are only effective in teletext operation.
> select MAC channel with teletext service.
> press
The television picture disappears and the teletext overview (p.100) is displayed, in case it exists.
4.3.1 Page selection
> enter a number with three digits, e.g. 2 0 0 or
> press to toggle the page numbers up or down
The page is searched in the memory and is displayed on the screen after some seconds, in
case it exists.
Some teletext pages consist of several subpages which are displayed automatically.
STOP
> select to hold and release the subpage
4.3.2 Special functions
HDLINE
> press
The standard television picture is displayed again, this time with a teletext headline, including
(from left to right):
selected page number, current page number, channel name, date, time.
HDLINE
> with back to teletext operation
TMIX
> press
The television picture is displayed in the background between the text lines.
TMIX
> with back to teletext operation
SIZE
> pressed for the first time: upper screen half with double height
pressed for the second time:
lower screen half with double height
pressed for the third time: entire screen with standard height
> press
An overview of the pages in the text memory is displayed. You can select them immediately
(without page search).
> press for teletext operation
Some teletext pages (for example riddle) contain hidden information that you can reveal and
?
hide again pressing ("riddle key").
> with or
CHANNEL
back to television operation
*EC 4004 ENGL. 14.12.1999 9:56 Uhr Seite 10