Technical data – TechniSat EC 4004 User Manual
Page 35
TechniSat EC 4004
35
8. Technical data
Tuner
input frequency:
950-2050 MHz
input resistance:
75 ohms
input level:
44-78 dBV
input connection:
F connector
bandwidth:
27 MHz
tuning:
PLL frequency synthesis
Outdoor unit supply
LNB supply voltage:
14 V / 18 V switchable at a maximum of 400 mA
modulation with 22.2 kHz, Vp-p = 500 mV
can be switched off
feed only in active mode, switchable to
permanent feed using an internal coding jumper,
also in standby mode
polarizer current:
-60 mA... + 60 mA adjustable in steps of
approx. 2 mA
Video
deemphasis
PAL:
CCIR REC 405-1
MAC:
according to MAC specification
output level:
Vp-p = 1 V
output:
SCART & CINCH connector
output resistance:
75 ohms
Decoder output
mode of operation:
4 different signals switchable
output level:
Vp-p = 1 V or 0.4 V (flat)
output:
SCART & CINCH connector
output resistance:
75 ohms
Audio
carrier frequency (PAL):
5.5 ... 8.7 MHz
IF bandwidth (PAL):
130/200/280/380 kHz switchable
modes of operation (PAL):
mono/stereo switchable
deemphasis (PAL):
50 Ês, 75 Ês, J 17, adaptive
(Panda-Wegener compatible)
50 Hz... 15 kHz
output level:
Vp-p = approx. 2 V in case of full drive
output:
SCART & CINCH connector (left, right)
HF modulator
UHF range:
channel 32...42 adjustable
preset to channel 39
colour standard:
PAL G
UHF output level:
74 +/- 4 dBÊV
UHF output:
IEC male connecto
antenna input
IEC female connector
*EC 4004 ENGL. 14.12.1999 10:01 Uhr Seite 35