Topfield TF 5100 CI User Manual
Page 14
8
Setup
• Do not expose the digital receiver to any moisture. The
digital receiver is designed for use indoors only. Use dry
cloth when cleaning the digital receiver.
• Place the digital receiver on a firm and level surface.
• Do not place the digital receiver close to heat emitting
units or in direct sunlight, as this will impair cooling.
Do not lay any objects such as magazines on the digi-
tal receiver. When placed in a cabinet, make sure there
is a minimum space of 10 centimeter around it. For the
physical specification of the digital receiver, refer to Ta-
ble
• Protect the power cord from being walked on or pinched.
If wires are exposed or cord is damaged, do not use the
receiver and get cord replaced.
• Never open the digital receiver casing under any cir-
cumstances. Warranty will be void.
• Refer all servicing to an electronics qualified service tech-
nician.
Table 2.1: Power specification
Input voltage
90 to 250 V AC, 50/60 Hz
Power consumption
28 W at maximum in operation
9 W in standby
Table 2.2: Physical specification
Size
340
Ч
60
Ч
265 mm
Weight
2.4 kg
Operating temperature
0 to 45 °C
Storage relative humidity
5 to 95 %