Topfield TF 5100 CI - Manual (Page 36)

30 Service Search
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Input your location to the My Longitude and My Latitude
options with the
✄
✂ ✁
V − ,
✄
✂ ✁
V +
and numeric buttons.
3. Input the position of your selected satellite to the Satel-
lite Angle if it is not correct.
4. Select the Goto the position option. Then the antenna
will turn toward your selected satellite calculating its
position.
5. If the receiving quality, which is displayed on the right
bottom on the screen, is not good, then tune the antenna
finely with the options of the Move menu. The changed
position is automatically saved at one. At this time you
had better check the receiving quality of every trans-
ponder and choose the best one at the Transponder (or
Frequency
) option. It will be helpful to your fine tuning.
4.1.4 Searching services
To perform service search, se-
lect the Installation > Service
Search
menu.
There are four service search methods:
• Searching every service of a satellite.
• Searching every service of a transponder.