Toshiba SD-43HK - Manual (Page 20)

38 37
SETUP
2 3
Press the PL II button. Press the PL II MODE button.
1
Press the Function button on the front panel to select the desired function.
• Each time the PL II button is pressed.
• Select from FM ➞ AM ➞ DVD ➞ DIGITAL IN ➞ AUX 1 ➞ AUX 2.
• Each time the PL II MODE button is pressed.
PRO LOGIC
L C R
LS
LFE
RS
L R
LFE
PRO LOGIC
L C R
LS
LFE
RS
PRO LOGIC
PRO LOGIC
L C R
LS LFE RS
PRO LOGIC
L C R
LFE
S
L C R
LS LFE RS
PRO LOGIC II : Left, Center, Right,
Subwoofer and
Surround(Left, Right)
Channels
STEREO : Left, Right and Subwoofer Channels
Dolby Pro Logic II decoder
Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improvements over
conventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround, but
also regular stereo sources into five channels (front left/right, center and surround left/right). In addition,
various parameters can be set according to the type of source and the contents, so you can adjust the
sound field with greater precision.
Pro Logic II Mode
Select one of the modes (“CINEMA”, “PRO LOGIC”, “MATRIX” or “MUSIC”).
• The Music mode is recommended when listening to CDs or watching DVDs with mostly
musical content.
• The Cinema mode is best when watching movies.
• The Pro Logic mode offers the same surround processing as original Pro Logic and is
best used when the source contents are not of optimum quality.
• The Matrix mode is useful for when the audio is mono.
Dolby Pro Logic II
Note
Dolby Pro Logic II Effect Function
This function works only in Dolby Pro Logic MUSIC mode.
1 2
Press PL II MODE button to select
‘MUSIC’ mode.
Press PL II EFFECT button and
then press Left/Right ( / ) buttons
to select the mode.
▲
▲
3 4
Press PL II EFFECT button and then
press Left/Right ( / ) buttons to
select the next mode. Press PL II EFFECT button and
then press Left/Right ( / )
buttons to select the next mode.
▲
▲
▲
▲
• You can select between 0 and 7. • You can select between 0 and 6.
• You can select either 0 or 1.
TITLE PBC CHAP PRGM RDS RT TA TUNED
kHz MHz
ST PRO LOGIC
LINEAR PCM
L C R
LS
LFE
RS
TITLE PBC CHAP PRGM RDS RT TA TUNED
kHz MHz
ST PRO LOGIC
LINEAR PCM
L C R
LS
LFE
RS
TITLE PBC CHAP PRGM RDS RT TA TUNED
kHz MHz
ST PRO LOGIC
LINEAR PCM
L C R
LS
LFE
RS
TITLE PBC CHAP PRGM RDS RT TA TUNED
kHz MHz
ST PRO LOGIC
LINEAR PCM
L C R
LS
LFE
RS
• PANORAMA: This mode extends the front stereo image to include the surround speakers for an exciting
"wraparound" effect with side wall imaging.
• CENTER WIDTH: Sound is output to the center speaker only.
The front left and right speakers produce phantom sound.
• DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and (Dolby Pro Logic II) button does not work.