Toshiba SD-43HK - Manual (Page 23)

MISCELLANEOUS
44 43
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause
breaks in playback. Be especially careful not to scratch discs when handling them.
When you get fingerprints or dirt on the
disc, clean it with a mild detergent diluted
in water and wipe with a soft cloth.
• When cleaning, wipe gently from the inside to the
outside of the disc.
Do not touch the playback side of the
disc. Hold the disc by the edges so that
fingerprints will not get on the surface.
Do not stick paper or tape on the disc.
• Condensation may form if warm air comes into contact with cold parts inside the
player. When condensation forms inside the player, the player may not operate
correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours
with the power on.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked discs or discs that are scratched.
Do not keep in direct
sunlight Keep in a clean
Protection jacket.
Store vertically. Keep in a cool
ventilated area
Sleep Function
To set up Sleep
• Each time the button is pressed the selection
on the front panel toggles as follows:
SLEEP 10
➔ SLEEP 20 ➔ SLEEP 30 ➔
SLEEP 60 ➔ SLEEP 90 ➔ SLEEP 120 ➔
SLEEP 150 ➔ OFF.
• Press the SLEEP button.
The remaining time for the selected Sleep time is displayed on the front panel.
• Pressing the button once again changes the Sleep time from the last setting.
Press the SLEEP button. What is the
Sleep function?
You can set the sleep time so that
the unit powers off automatically
after a preset period of time.
To Review Sleep Setting
Using Headphone Jack
Connect a stereo headphone plug (ø3.5mm) into the PHONES connector.
The speakers are automatically disconnected when you plug in the headphones (not supplied).
• When you use the headphones, keep the volume at a moderate level.
If you use the headphones continuously with high volume sound,
it may cause hearing damage. Note
Note
Caution
Mute Function
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer the telephone,
“MUTE” indicator flashes in the display window.
Handling discs
Disc Storage
Handling and Storing Discs