Teledyne 2103 - Manual (Page 8)

2103 Modem Module
Section 1 Introduction
1-2
1.3 Identifying Module
Components
Figures 1-1 and 1-2 identify the key components of the 2103
Modem.
Figure 1-1 2103 Modem Components - Top View
1
3
4
5
6
2
Table 1-1 2103 Modem Module Components - Top View
Item No. Name Description
1 Communication Connector This port is used to connect the 2103 Modem to other modules
in a stack.
2 Connector Cap Insert into the communication connector when it is not in use to
protect the connector from moisture damage. When the connec-
tor is in use, store the connector cap in the cap holder.
3 Cap Holder Stores the connector cap when the communication connector is
in use.
4 Modem Cable Connector
(2103 only) Used to connect the modem cable to the 2103 Modem Module.
5 Modem Cable Connector Cap Insert into the modem cable connector when the connector is
not in use to protect the connector from damage.
6 Latch Release Push in to unlock the module from a stack.