T-Fal Emerilware - Manual (Page 4)

4
27. Keep hands and utensils away from
the cutting blade while chopping
food to reduce the risk of severe
injury to persons or damage to the
food chopper. A scraper may be
used but only when the food
chopper is not running.
28. Always make sure juicer cover is
clamped securely in place before
motor is turned on. Do not unfasten
clamps while juicer is in operation.
29. Be sure to turn switch to OFF
position after each use of your
juicer. Make sure the motor stops
completely before disassembling.
30. Do not put your fingers or other
objects into the juicer opening while
it is in operation. If food becomes
lodged in opening, use food pusher
or another piece of fruit or
vegetable to push it down. When
this method is not possible turn the
motor off and disassemble juicer to
remove the remaining food.
31. Do not use the appliance if the
rotating sieve is damaged.
CAUTION: This appliance is for household use only. Any servicing other than
cleaning and user maintenance should be performed by the nearest authorized
T-fal Service Center.
Do not immerse base in water.
SPECIAL CORD INSTRUCTIONS
A. A short power-supply cord has been provided to reduce the risks resulting
from becoming entangled in or tripping over a longer cord.
B. A longer detachable power-supply cord or extension cord are available and
should be used with caution.
C. If a long extension is used, (1) the marked electrical rating of extension cord
should be at least as great as the electrical rating of the appliance, (2) if the
appliance is of the grounded type, the extension cord should be of a
grounded type, and (3) the longer cord should be arranged so that it will not
drop over the counter top or table top where it can be pulled on by children
or tripped over.
D. This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not attempt to
modify the plug in any way.
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS