TRENDnet TEW-509UB - Manual (Page 20)

14
LCD Icons
The illustration below shows the icons in the LCD. All the icons will not necessarily appear
together as shown here.
Fully charged and Recharging icons would appear during charging process only.
Finding a Hot Spot
Refer to the following to find a hot spot.
3. Switch Power to ON.
The TEW-509UB boots and searches for hot spots.
4. Press Next to scroll the available hot spots.
Accessing a Hot Spot
5. Connect the TEW-509UB to your computer and open the Wireless Client Utility.
6. Open the SiteSurvey screen and select the hot spot you want to access.
7. Click Connect to access the hot spot.
1 SSID:
Displays the SSID of the current connection. Scrolls
horizontally for longer names.
2 Channel:
Displays the channel number of the current
connection.
3 Found:
Displays the number of connections found. Up to 16
connections can be monitored.
4 Power:
Indicates the battery status: low;
fully charged; recharging.
Press and hold the Seek button to scroll through
the three modes: [S]; [F]; and [D].
Scan results are ranked in order of signal
strength.
Only lists open hot spots ranked in order of
signal strength.
5 Scan mode:
Continually refreshes details of the selected hot
spot. Allows you to lock on and monitor the
signal strength as you move around.
6 Security
Displays the security settings of the network:
[WEP]/[WPA] security enabled;
security
disabled.
7 Signal
Strength
Displays the signal strength (five levels) and
radio band: [A]/[G]/[B] 802.11a/g/b.
7
3
2
6 4 5
1