Troubleshooting, Problems communicating with other computers – TRENDnet TEW-509UB User Manual

Page 40

Advertising
background image

34

Troubleshooting

P

ROBLEMS

S

TARTING THE

802.11a/g W

IRELESS

C

LIENT

U

TILITY

P

ROGRAM

PROBLEM CORRECTIVE ACTION

Make sure the TEW-509UB power switch is turned off and properly inserted into
the USB port and then restart your computer.

Perform a hardware scan by clicking Start, Settings, Control Panel and then
double-click Add/Remove Hardware. (Steps may vary depending on Windows
version).
Follow the on-screen instructions to search for the TEW-509UB (Wireless 802.11
USB Network Adapter) and install the driver.

Check for possible hardware conflicts. In Windows, click Start, Settings, Control
Panel, System, Hardware
and then click Device Manager. Verify the status of the
TEW-509UB (Wireless 802.11 USB Network Adapter) under Network Adapter.
(Steps may vary depending on the Windows version).

Windows does not
auto-detect the
TEW-509UB.

Install the TEW-509UB in another computer. If the error persists, there may be a
hardware problem. In this case, please contact your local dealer for support.

P

ROBLEMS WITH THE

L

INK

S

TATUS

PROBLEM CORRECTIVE

ACTION

The link quality and/or
signal strength is poor all
the time from the status
bar.

Search and connect to another AP with a better link quality using the Site
Survey
screen.

Change the channel used by your AP.

Move your computer closer to the AP or the peer computer(s) within the
transmission range.

There may be too much radio interference (for example microwave or
another AP using the same channel) around your wireless network.
Relocate or reduce the radio interference.

P

ROBLEMS WITH

S

ECURITY

S

ETTINGS

“Disconnected” (meaning
authentication failure)
Shown in the Status Bar

Make sure your AP/Router has the same setting as your client adapter and
follow AP/Router’s security settings.

LED PWR and LINK are
on but cannot receive or
sending data and connect
to network

Make sure your AP/Router has the same setting as your client adapter and
follow AP/Router’s security settings.

Problems Communicating With Other Computers

PROBLEM CORRECTIVE

ACTION

The TEW-509UB
computer cannot
communicate with the
other computer.

Make sure you are connected to the network.

Advertising