Tyco Electronics PL0349 - Manual (Page 3)

8 Port Ethernet Smart Switch With Fibre Uplink
Tyco Electronics Page 3
Front Panel
The front panel of the switch has the LED indicators, the fibre
uplink port and the RJ-45 Shielded/Unshielded Ethernet Ports.
Figure 1 - Switch Front Panel
Rear Panel
The rear panel of the switch contains the IEC style power inlet
connector and the console management connector.
Figure 2 –Switch Rear Panel
Ports
RJ-45 Ports. These Ethernet RJ-45 ports support both
shielded and unshielded cabling systems. Each port auto-
negotiates the 10/100Mbit/s network speed and auto-
detects the connected device type which eliminates the
need for cross-over cables.
Fibre Port. The switch has a fibre uplink port that can be
connected to 100Base-FX devices. Different optical
connector formats are available (ST/SC/MT-RJ) together
with singlemode and multimode fibres.
Console Port. This port enables the administrator to
change switch settings such as port values, VLANs etc.
AC Power Connector This connector accepts any
standard IEC 320 style power connector.