Thecus Technology Thecus N199 - Manual (Page 10)

Front Panel
The N199’s front panel displays the unit’s array of status LEDs, and is also where
you’ll find the power button and USB port. See the table below for a detailed
explanation of each:
Item Description
• Power on/off N199 Power Button
• Solid blue: N199 is powered on Power LED
• Blinking orange: system is starting up System Status LED
• Blinking red: system error
• Off: system startup complete; system operating normally
• Solid green: network link LAN LED
• Blinking green: network activity
• Solid blue: HDD 1 detected
transfer
HDD 1 LED
• Blinking blue: Active HDD 1 data
• Solid red : HDD 1 error detected
• Blinking red: HDD 1 capacity is nearly full (90% or more)
* If RAID is configured, capacity is based on the entire RAID
system.
USB LED • U
(5 seconds): USB device connected
LED
hen one or more card is mounted
(5 seconds): USB device connection failure
• D
B device read/write error
SB Device Connection
o
Blinking blue
successfully.
*For universal USB memory card readers, the USB
will blink blue w
successfully.
o
Blinking red
ata Transfer
o
Blinking blue: Active data transfer
o
Blinking red: US
One-Button USB
Copy
•
rt
time
One-Button Copy
Push once to copy entire USB volume to the N199. A sho
beep will sound to acknowledge that files are now being
copied. Files are stored in a folder named by current
stamp: (YearMonthDayHHMM)
10
USB Port • USB 2.0 port for USB storage expansion.