TOYOTA 5613 - Manual (Page 25)

25 ‘05 - ‘06 Tacoma (W/ O.E. Hitch) - 3” Kit 5613
c. Install radiator and four kit brackets to core sup-
port with four kit washers (1/4” SAE) and four kit
nuts (1/4” Nylock). DO NOT TIGHTEN.
d. Assemble kit plates (radiator block off) with kit
bolt (1/4” x 1”), two kit washers (1/4” SAE) and
kit nut (1/4” Nylock). DO NOT TIGHTEN.
e. Install kit plates (radiator block off) to radiator
with four factory pop-up clips.
Kit Washer
(1/4” SAE),
Kit Nut
(1/4” Nylock)
Kit Bracket
(3” Radiator)
Kit Plates
(Radiator
Block Off)
Kit Bolt
(1/4” x 1”),
Kit Washer
(1/4” SAE),
Kit Nut
(1/4” Nylock)
Kit Plates
(Radiator
Block Off)
Factory
Pop-up Clips
f. Install radiator cover to core support with five
factory pop-up clips.
g. Install radiator cover to kit plates (radiator block
off) with four kit clips (push) and four kit wash-
ers (1/4” SAE).
h. Adjust radiator and ensure fan does not contact
fan shroud.
i. TIGHTEN all hardware.
Radiator
Cover
Factory
Pop-up Clips
Core
Support
Kit Clip
(Push),
Kit Washer
(1/4” SAE)
Radiator
Cover