Toro GROUNDSMASTER 345 - Manual (Page 15)

TORO GM 345 Ford VSG-411 Gas Engine
Notes
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
13
High Idle Adjustment.
1. Slowly move the throttle to the FAST position until the engine reaches 3200
±
100. Shut off the engine.
Adjust the high speed adjustment screw until it contacts the speed control lever.
IMPORTANT: Do not overspeed the engine because transmission damaged could occur.
2. If 3200 rpm can not be attained, check the throttle cable adjustment.
•
The governor arm must not contact the cable cover when the unit is at high idle.
•
If the governor arm contacts the cable, loosen the retaining bolt and move the cable.
3. If the throttle lever on the instrument panel will not stay in the fast position, remove the panel cover and
tighten the nut and capscrew at the base of the throttle lever.