Teac DVD Receiver DR-H300 - Manual (Page 41)

41
ENGLISH
Setting the Clock
If the unit is on, press the STANDBY/ON switch to turn
it standby. 1
Press the VOLUME button to set the current hour. 3
Press the CLOCK button. 4
Press the VOLUME button to set the current minute. 5
Press the CLOCK button.
The clock starts.
6
Press the CLOCK button. 2
(If “- -:- -” blinks on the display, press the CLOCK button
again.)
“CLOCK SET” briefly appears on the display, and the “hour”
value starts blinking.
< If no button is pressed for 10 seconds, the time setting mode
will be cancelled.
The “minute” value starts blinking