Introductory information, General, Security guidelines – THB Bury Bluetooth Hands-Free Car Kit CC 9060 User Manual

Page 3

Advertising
background image

2

3

Position, volume
Install the components of the device in the vehicle so that your field of
vision is not impaired and the components are not mounted in the im-
pact zone of the passenger compartment or in the airbag inflation zo-
nes. The removal of coverings (with and without airbags) or compon-
ents of the dashboard requires – in some cases – special tools and
special knowledge.

Intended use
We shall not be liable for damages or malfunctions due to improper use
of the navigation system. Therefore, do not expose the device to mois-
ture, extreme temperatures or shocks and carefully follow the procedu-
re described in the installation and operating guidelines.

Use while driving
Operate the system only when the situation allows it and when you do
not endanger, harm, constrain, or annoy other road users. The volume
of the device has to be set in a way that exterior noise is still audible.

Faults
Do not commission the device if you detect or assume a defect. In this
case, contact a BURY specialised dealer or our hotline. Improper repair
efforts can be dangerous for you. Therefore, only skilled personnel may
perform inspections.

Important:

The driver is ultimately responsible for the safe operation

and control of their vehicle at all times. You should never
use a hand held phone, including sending or reading text or
picture messages, while driving.

Research indicates that there is a risk to safety when the

driver of a motor vehicle is distracted and using a mobile
phone while driving can be a distriction.

The manufacturer strongly recommends that you use a

hands-free solution when driving.

Introductory information

1. General

Dear customer,

Congratulation on purchasing a BURY hands-free car kit. You have cho-
sen a high quality product that is extremely easy to use. All aspects of
BURY production through to sales and service are subject to strict qua-
lity management according to DIN EN ISO 9001. All BURY hands-free
car kits meet CE and e1 security standards. Furthermore, we provide a
two-year warranty on all components.
Please read the operating manual carefully so that you can fully enjoy
your BURY hands-free car kit. If you have any further questions concer-
ning installation or operation of your car kit, please contact your dealer.
He will be happy to give you reliable advice. You can also contact our
hotline. Our phone and fax numbers are listed in the chapter Service at
the end of the operating instructions.

Have a good trip!

2. Security guidelines

Installation – who and where
The installation of this system can be carried out by yourself but please
observe the installation requirements of the automotive manufacturer
(VAS 1978). During the installation, park the car at a place where the
road traffic is not impaired. We recommend to let a specialised work-
shop perform the installation.

Power supply
This system has been designed for the use in vehicles with an on-board
supply system of 12 volts (passenger car). If you intend to install the
device in a vehicle with an on-board supply system of 24 volts (lorry),
please use a voltage converter. If you have queries regarding this sub-
ject, please contact our hotline.

Avoid exposure to long peri-
ods of direct sunlight when
vehicle is parked as this can
cause, among others, da-
mage to the readability of
the display. The sound func-
tioning of the display is gua-
ranteed up to a maximum
temperature of 60° C.

Advertising