Removing the side-discharge chute, Figure 26, Side-discharging the clippings – Toro Timemaster 20199 User Manual

Page 14: Removing the grass bag, Warning, Installing the side-discharge chute

Advertising
background image

G016513

1

2

Figure 26

1.

Bag rod

2.

Notch (2)

4. Lower the rear deflector until it rests on the grass bag.

Removing the Grass Bag

To remove the bag, reverse the steps in Installing the
Grass Bag above.

Side-discharging the Clippings

Use the side discharge for cutting very tall grass.

If the bag is on the machine, remove it and insert
the rear-discharge plug; refer to (page 9) before
side-discharging the clippings.

Important: Ensure that the rear-discharge plug is
in place before you recycle the clippings (Figure 24).

WARNING

The blade is sharp; contacting the blade can result
in serious personal injury.

Stop the engine and wait for all moving parts to stop
before leaving the operating position.

Installing the Side-discharge Chute

With the chute in your right hand:

1. Lift open the side-discharge deflector (Figure 27).

G017521

1

2

Figure 27

1.

Side-discharge deflector

2.

Side-discharge chute

2. Install the side-discharge chute as shown in

Figure 27 and Figure 28, and close the deflector onto
the chute.

G017522

Figure 28

Removing the Side-discharge Chute

To remove the side-discharge chute, reverse the steps in
Installing the Side-discharge Chute above.

14

Advertising
This manual is related to the following products: