Telit Wireless Solutions GE863-QUAD - Manual (Page 63)

GE863-QUAD
GE863-PY
1vv0300715 Rev. 1 - 19/09/06
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 63 of 79
12.1.2 EVB for Transchip camera support
In order to interface the Telit GE863-QUAD / PY with a CMOS camera, Telit has developed an
evaluation board. The EVK allows the connector of all Telit modules through 2 connectors of 40 pins
each.
The I2CBUS DUAL CAMERA board is plugged in the 2 connectors of 30 pins each on the module
board.
MODULE
BOARD
MAIN
BOARD
CAMERA
BOARD