Chapter 5 snmp – Trango Broadband TrangoLINK-45TM User Manual

Page 38

Advertising
background image

SNMP

SNMP

Trango Broadband Wireless — TrangoLINK-45

page 38

Chapter 5 SNMP

SNMP

The TrangoLINK-45 supports SNMP (Simple Network Management Protocol). Network management consists of the
following 3 categories: configuration, Link and Association monitoring and Alarms. Besides this proprietary
Management Information Base (MIB) the TrangoLINK-45 also supports a large part of the MIB-II OIDs.

Review the Trango MIB (TRANGO-P5M-MIB.mib) available on our website for the complete listing of all MIB objects
available.

These capabilities allow the system administrator to provide superior service through higher network accessibility and
integrated performance monitoring.

Depending on your Network Node Manager (NNM) it may be necessary to append a “.0” onto the end of each of the
OIDs listed below for proper operation.

Objects for Configuration Name

Description

1.3.6.1.4.1.5454.1.40.1.1.1

verUnitType

Returns radios unit type
(0 = RU, 1= MU)

1.3.6.1.4.1.5454.1.40.1.8.3 sysswAutoScanMUSignal

Returns value of Auto Scan switch
(0 = off,1 = on)

1.3.6.1.4.1.5454.1.40.1.3 sysDefaultOpmode

Returns defaultOpmode setting

(0

=

off,1

=

on)

1.3.6.1.4.1.5454.1.40.1.4

sysCurrentOpmode

Returns current opmode setting

(0

=

off,1

=

on)

1.3.6.1.4.1.5454.1.40.1.5

sysActivateOpmode

Turns opmode on

1.3.6.1.4.1.5454.1.40.1.13.1

sysipconfigIpAddress

Sets IP address

1.3.6.1.4.1.5454.1.40.1.13.2 sysipconfigSubnet

Sets

subnet

1.3.6.1.4.1.5454.1.40.1.13.3

sysipconfigDefaultGateway

Set default gateway

1.3.6.1.4.1.5454.1.40.1.13.4

sysipconfigChange

Activates IP address change

1.3.6.1.4.1.5454.1.40.2.1 rfPeerDeviceID

Configure

PeerID

1.3.6.1.4.1.5454.1.40.2.2

rfActiveChannel

Displays

current

channel

1.3.6.1.4.1.5454.1.40.2.3 rfActivePolarization

Displays current antenna polarization

1.3.6.1.4.1.5454.1.40.2.4 rfSpeed

Displays

current

Speed

setting

1.3.6.1.4.1.5454.1.40.2.5 rfTxPower

Displays current transmit power (dBm)

1.3.6.1.4.1.5454.1.40.1.14

sysRemarks

Display

radios

remarks

Objects for Link and Association Monitoring

1.3.6.1.4.1.5454.1.40.2.12

rfRSSI

Displays

RSSI

value

(dBm)

1.3.6.1.4.1.5454.1.40.2.13

rfAssociated

Displays current association status

(0

=

disassociated,1

=

associated)

1.3.6.1.4.1.5454.1.40.3.2

ruReboot Reboots

RU

1.3.6.1.4.1.5454.1.40.3.3

ruDistance

Displays

current

ru

distance

Objects for Bandwidth Monitoring

1.3.6.1.4.1.5454.1.40.1.9.1 systrafficEthInOctets

Displays Ethernet in (bytes)

1.3.6.1.4.1.5454.1.40.1.9.2

systrafficEthOutOctets

Displays Ethernet out (bytes)

1.3.6.1.4.1.5454.1.40.1.9.3

systrafficRfInOctets

Displays RF in (bytes)

1.3.6.1.4.1.5454.1.40.1.9.4

systrafficRfOutOctets

Displays RF out (bytes)

Objects for Alarm Monitoring

1.3.6.1.4.1.5454.1.40.3.4.1.1 trapTrapDstEntry
1.3.6.1.4.1.5454.1.40.3.4.1.2 trapTrapDstEnabling

Enable/Disable

trap

1.3.6.1.4.1.5454.1.40.3.4.2 trapTrapIpAddress Set destination trap IP
1.3.6.1.4.1.5454.1.40.3.4.3

trapTrapCommStr

Set trap community string

Advertising