Telex RadioCom BTR-500/600C - Manual (Page 32)

Beltpack to Beltpack System
The following is an example of a beltpack to
beltpack system. The two operators need to be in
constant, full-duplex communication with each
other in a noisy paper press environment.
Figure 51
Example of a TR-500 System used at a Publishing Firm
-29-
T elex
RF TX = FREQ 1
RF RX = FREQ 2
T elex
RF TX = FREQ 2
RF RX = FREQ 1
Single Beltpack to Single Beltpack System