TRENDnet TV-IP100-N - Manual (Page 100)

99
B PING Your IP Address
The PING (Packet Internet Groper) command can determine
whether a specific IP address is accessible by sending a packet to
the specific address and waiting for a reply. It can also provide a
very useful tool to confirm if the IP address conflicts with the
Wireless Camera over the network.
Follow the step-by-step procedure below to utilize the PING
command. However, you must disconnect the Wireless Camera
from the network first.
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the Wireless
Camera.
The succeeding replies as illustrated below will provide useful
explanation to the cause of the problem with the Wireless Camera
IP address.