TRENDnet TV-IP100-N - Manual (Page 99)

98
A: The Camera is not weatherproof. It needs to be equipped with
a weatherproof case to be used outdoors and it is not
recommended.
Q: What network cabling is required for the Camera?
A: The Camera uses Category 5 UTP cable allowing 10 Base-T
and 100 Base-T networking.
Q: Can the Camera be setup as a PC-Cam on the computer?
A: No, the Camera is an Camera used only on Ethernet and Fast
Ethernet network and wireless transmission (Wireless only for
TV-IP100W-N).
Q: Can the Camera be connected on the network if it consists of
only private IP addresses?
A: The Camera can be connected to LAN with private IP
addresses.
Q: Can the Camera be installed and work if a firewall exists on
the network?
A: If a firewall exists on the network, port 80 is open for ordinary
data communication. However, since the Wireless Camera
transmits image data, the default port 8481 is also required.
Therefore, it is necessary to open port 8481 of the network for
remote users to access the Camera.