TP-Link Cable/DSL Router TL-R860 - Manual (Page 42)

TL-R860 Cable/DSL Router User Guide
- 36 -
4.9.1 Binding Setting
This page displays the IP & MAC Binding Setting table, you can operate it in accord with
your desire. (shown in Figure 4-37).
Figure 4-37 IP & MAC Binding Setting
• MAC Address - The MAC address of the controlled computer(s) in the LAN.
• IP Address - The assigned IP address of the controlled computer(s) in the LAN.
• Bind – Enable or disable the arp binding.
• Modify - Edit or delete item.
When you want to add or modify an IP & MAC Binding entry, you can click the Add New
button or Modify button, then you will go to the next page. This page is used for adding
or modifying an IP & MAC Binding entry
(shown in Figure 4-38).
Figure 4-38 IP & MAC Binding Setting (Add & Modify)
To add IP & MAC Binding entries:
1. Click
the Add New.. button.
2. Enter the MAC Address and IP Address.
3. Select the Bind checkbox.
4. Click
the Save button to save it.
To modify or delete an existing entry: