TP-Link Cable/DSL Router TL-R860 - Manual (Page 49)

TL-R860 Cable/DSL Router User Guide
- 43 -
Click the Restore button to reset all configuration settings to their default values.
• The default User Name: admin
• The default Password: admin
• The default IP Address: 192.168.1.1
• The default Subnet Mask: 255.255.255.0
)
Note:
Any settings you have saved will be lost when the default settings are restored.
4.11.4 Backup and Restore
This page (shown in Figure 4-48) allows you to save current configuration of the router to
a special file backup or restore the configuration file you saved before.
Figure 4-48 Backup & Restore Configuration
¾ Click the Backup button to save all configuration settings as a backup file in your
local computer.
¾ To restore the router's configuration, follow these instructions:
• Click the Browse button to select the backup file which you want to restore.
• Click the Restore button.
)
Note:
The current configuration will be covered with the uploaded configuration file. The
restoration process will last for about 20 seconds and the router will restart automatically.
Keep the router on during the restoring process, to prevent any damage.
4.11.5 Reboot
This page (shown in Figure 4-49) allows you to reboot the router.
Figure 4-49 Reboot the router
Click the Reboot button to reboot the router.
Some settings of the router will take effect only after rebooting, which include:
• Change LAN IP Address. (System will reboot automatically)